Rule of thumb · Physics SimulationNº 86 / 150

Braking distance goes as speed squared

Braking distance scales with the square of speed — 20% faster needs 44% more room, and twice the speed needs four times.

Why it works

v² = u² + 2as with v = 0 gives s = u²/(2a). The speed is squared and the deceleration is not, so distance grows far faster than the speedometer suggests. At a steady 10 m/s², 30 m/s takes 45 m and 60 m/s takes 180 m.

When it fails

This is the braking phase only. Real stopping distance adds thinking distance, which grows linearly with speed and can be a third of the total at low speeds. Deceleration is also not constant — it falls off as tyres unload and on a wet or loose surface may be half of what you assumed. Treat it as the floor, never the number.

Do it exactly

Estimate with the rule, then check it against the calculator that models it properly.

Open SUVAT Calculator →

More in Physics Simulation

← PreviousFalling: 5 metres in the first second Next →45° for range — in a vacuum

How much further does it take to stop if I go faster?

Braking distance scales with the square of speed — 20% faster needs 44% more room, and twice the speed needs four times. v² = u² + 2as with v = 0 gives s = u²/(2a).

Browse all 150 rules of thumb →